ID# 178167Posted Jul 19
1999 Jimco chasis, Chevy V6 engine, Fortin tranny
For sale by owner
Off road race car: Jimco 2- seater
Engine: fuel injected V-6 Chevy, mid-engine odd fire. 400+ horse power. Built by Ray Brock, San Diego, CA.
Transmission: Fortin 5 speed, 9 inch Ford R&P.
Shocks: ALL NEW - KING shocks on all four corners.
Tires: 35 inch BFG all terrain
PCI intercom and Parker Pumper
A-arm front end with HOWE power steering
New 60 gallon fuel cell
Equipped with Motec Engine Management System
Owner requests any buyers outside state of Utah be responsible for shipping & transportation.
When contacting owner during business hours, please adhere to Mountain Time zone (MST).
ID# 178155Posted Jul 19
0 Jake’s Fabworks One of a kind Baja
This one of a kind Hand made Jake’s Fabworks Class 5 Unlimited Baja was meticulously built from the ground up on the same class winning platform as his race winning cars. The difference is it has doors, windows, a/c, turn signals, running lights and is street legal! Everything else is the same or better !
ID# 177539Posted Jul 15
2020 Jimmys 4x4 Ultra 4 IFS
Almost Brand new Jimmys Car, Have raced 2 races. Getting re prepped and ready to race. This is an amazing car and love to drive it but priorities are Changed right now and need to sit on the side lines for a bit. See the amazing build sheet
Next level Dragon 2-seat IFS-Hard Roller
PRO PKG Hard Roller
Fabrication and assembly Full Tig weld (Chassis, Brackets, suspension)
CHASSIS NEXT LEVEL “NL” IFS:
NL “Next Level” IFS FE-"Pro-line" CNC Chromolly chassis / pro line Race
All support tube, 100% tube, Including all dash, Interior, seats
RD-RE2-Slant V2.0 Red Dragon Front Engine 2-seat Version
**Gen III Lower Belly, Wider spread on Trailing Arm’s
IFS Roller Hard Part kit; Included
Spidertrax Chromolly 10" front housing,
**7075 Aluminum Billet outer Uprights/Knuckles
**7075 Aluminum Billet Upper A’arms
Lower A'arm chromolly, Billet Ends at all four corners, fully Heat treated
Steering swing set Mount, Heat treated
Tie Rod’s 7075 Aluminum
Complete Hardware kit FK Rod ends, Com bearings
**New for 2020 4140HSTR Nitrate plated spacers/Misalignments
Pair of Unit Bearings 45 spline (2” OD) 6 on 5.5
RCV series 30 Inboard and outboard Race Prep Bolt holes bored and Knurled
33 spine front mid shaft 300M,
Inboard axle stub's 40 Spline
outboard axle stubs, 300M 45 spline outers
Boots, Band’s, Grease and CV-Bolts
**GEN III Rear link set up;
"Pro-line", 7075 Billet Aluminum Lower Trailing arm kit
(**Uses Pro-Am Large Billet wobble stopper Plates, and Com Bearing at Axle end)
Upper 7075 Billet Aluminum Links
Mounting bracket's at chassis w/Billet weld washers and inner saddle mounts,
Fabrication; “Brackets” Place and weld only
IFS "Pro Series", “Premier” Turnkey Fabrication;
All Major Mounts, and Race accessories (Com’s, Jack’s, Siren, Mirrors, etc)
IFS Master chassis “RACE” Bracket kit; (Pro-line) 100% complete Turnkey
Belly Skid plate/s (AR-Plate) **Removable
**2-sets, AR Plate KOH and Aluminum rest of the season
Motor mount's, w/Bushings
Motor Head mount kit, w/Bushings
Transfer-case torque mount, w/Bushings
seat tab's, and seat belt
Shock mount kit F&R (Cut away mount's w/Billet weld washers and saddle mount's),
Link Brackets Rear
Limit strap tabs
Radiator Mounting kit (CBR or Ron Davis),
Winch mount and fairlead mount,
Battery tray, (*Options)
Fuel tray / Tube w/Bungs
Dual Remote fill Dry break mounting bracket
Remote fill mount, (*Options, standard is Combo twist/Dry Break)
cooler mount's, Transmission, heat exchanger, steering, oil
Brake master pedal mount,
Steering column mount (for a PSC aluminum long column),
steering servo mount,
Limit strap tab's,
seat belt tab's,
Dry Sump Tank Mounting
Spare Driveline and Race Jack Mounted Low in Rear
**Add Jack Mounting Points and Trailer Jack mounting points for prep
Sheet-metal kit; Next Level Full Race Package
Top Dash and Dash Face plate
(*On Single seat Dragon, includes P-Side Sheet metal
Front Kicker's, w/screen
bead rolled inner panels and kickers w/stainless screen
Standard Rear window shakers screen w/stainless screen
100% DZUS fastener’s Interior and exterior
**Universal quick release on Hood
full Ducking splash around Radiator (*Replaces standard shaker screen)
Jeep JK Fiberglass
Front Suspension (A’arms at chassis and at Upright steering Knuckles (qty 12), Tie Rods (qty 4)
Rear Suspension (qty 8)
Motor mounts at chassis (qty 2) (*not at Block)
Head Mounts at Chassis (qty 2) (*not at block)
**12 point, Bolt & Nut 8740 Alloy w/aircraft washer
KING Racing Shocks
2.5x12” RS Coil Carrier with Remote Res
1” shaft upgrade
2.5x16” RS Coil Carrier with Remote Res
1” shaft upgrade
3.0 x 14” Bypass 6 tubes with 1” shaft and ¾ Large Tubes
3.0 x 16” Bypass 6 tubes with 1” shaft and ¾ Large Tubes
Front 2” shorty compact 2.0 Bump with Can
rear Bump Shock Eyelet type
Limiting straps-ELROD's **Double up
set of 8, Includes quad straps, Tabs and Bolts, Fabrication to place and weld 23”-28”
Steering Power Steering Solutions
3" x 6.0 TT Rack
Machined Spacers for steering Rack
Servo Control Valve
TT "P" Pump w/300M shaft
Pulley 8 groove serp
Pump mount and alt mount for TT set up
Reservoir set for Relief valve
CBR “Hi-Flow” Billet steering cooler
Aluminum Steering Column and U-Joints and Steering Mid shaft
PRP Suede Steering wheel w/Push to talk and Horn Tab and 6 bolt adapter
**Nylon Race Hose
**Hard line on brakes
**qty 2 Line locks on dash
Fuel and Cooling:
Red Dragon “Slant Back” FE 2-seat #PYRO-000592
Custom Pyrocell bladder, foam and .090 internal flange aluminum can with .080 lid. 5" tall baffle wall with 2 ball checks toward front, 10" tall baffle wall with 3 ball checks and 2 baffle walls creating an 8 " wide collector center rear with 4 additional ball checks. Built to drawing #Pyro000592.( Modified Pyro 000206 - Section removed)
parts for fill plate : (1) 6x10 plate - Bolt thru (2) OCG024 Gaskets (24) Bolts (24) Washers (2) 2.25 90 degree tubes (2) Wagon wheel- weld on (2) -10 Pickups (1) -8 Vent roll over valve (2) -8 Return
Fuel sending unit and Gauge
Dual Dry Break Remote fill 2.25x4.5” center w/hose
Brake kit / JAMAR 19-1 Pedal, Dual Master bracket and Balance-bar
CBR 16x12 Trans cooler w/12" fan (2.25 deep)
CBR 21x35 radiator w/heat exch & twin 15" fans (3" deep)
CBR Heat exchanger stand alone
Wiring and Electrical
Finishline Racing(Smitty) Full Chassis and Dash Wiring
Holley Dominator ECU
Holley 12” Dash
2 ECU Masters for all Accessory Controls
Baja Design Ligths
Body and Interior
Jimmys JK body with Bead rolled panels
Mechanical and Accessories
Rear Chromolly slip and spline, Balanced, Adams With 1 Spare
Front 934 CV, MW w/speed rated Carrier Bearing Dual shaft 4 yokes
PRP ALPHA Hard Seat
PRP Belts for Neck restraint
Headers custom Built
Wheels and Tires
Dirtylife Beadlock 6 x 6.5
BFG 40” Sticky
Lug Nuts Open 5/8 Tapered
Rear Custom 300M sway bar w/Billet arms arms
Front Custom 300M sway bar w/Fabricated arms arms
WINCH Warn 9000RC
Race Kit Options
Custom Built swinging SFI certified Nets
PCI Elite Race Com, Kenwood radio
Safecraft 10LB auto/manual fire suppression system
3 Safecraft Fire Ext. with mounts
488 Dart Tall Deck
Dart Tall deck Block
Dailey Dry Sump
MSD Intake (Carbon fiber dipped)
Holley 105 TB
Meziere Water Pump
Holley Dominator ECU
Air Cleaner Kit K&N 18x7x7 4” inlet, Tube and Boots w/Foam wrap
Zero Gravity Th400 in Reid case w/Converter
All Billit internals
Winters shifter w/mount;
Lokar Race ”
SCS (Straight Through, 1-1U, 1-1 QC, 1350 yokes)
ORD MAGNUM Box
Single shifter kit AA
Brake kit; F&R
Pro series Vented (Spidertrax Hat VR, Wilwood GT Vented Rotors, Wilwood 6P Bridged Calipers and Pads
TubeWorks TW-CrossTie X-LP Billet Ford 9" / 10" Third Member Extreme, ARB 40 spline
**w/Dual Load Bolt
SPIDER 9 REAR
4.0 x .25, Pro series housing
Rear Floater cup for 4.0 Tube
GW 45 spline UNIT BEARING, 6 on 6.5 LUG with race series shanked 5/8 studs,
**with dual Load Bolt
Master Rear Axle and Bracket kit; "Pro-Line"
Back brace with upper towers and Bump stop landing pad's, with Billet weld washers and inner saddle mounts
Lower link mounts with billet weld washers and inner saddle mounts
Axle Shafts (Includes S&H and assembly)
300M axle 45 spline shaft kit Gun Drilled
**Rear Pinion Guard
**Assembly Labor is Included in Master Fabrication
ID# 177005Posted Jul 15
0 FORD- ESM
ES MOTORSPORTS TROPHY TRUCK FOR SALE, TRUCK IS SUPER CLEAN AND HARDLY USED, WAS RECENTLY ALL PREPPED.
NEW CULHANE TRANNY
BB FORD MOTOR DE TUNED TO PUMP GAS/ 850 HP ON PUMP GAS ( BRUCE NOGRADY)
NEW BODY INSTALLED
NEW WHEELS AND TIRES
EXTRA SET OF 40" NITTO TIRES AND WHEELS
SET OF PADDLE TIRES 39"
JUST HAD THE FUEL CELL REDONE
NEW SPARCO SEATS
ID# 178040Posted Jul 14
1997 Ford F150
The famous Juggernaut 1400 is up for sale.
The truck is fully prepped with either new or rebuilt parts.
- Patton 465ci Small Block Ford with Bryant Crank and Carrillo Rods
- New Custom Pistons
- 12 Degree Heads
- New Daily Dry Sump System
- New Comp Cams, Lifters, and Pushrods - The Best You Can Buy
- T&D Rockers
- Pump Gas
- Custom Stainless Header Built by Roy - They are a Work of Art.
- Dual AEM CD7 Data Logger Displays Wired with 2 Switch Pros and All Deutsch Connectors
- Dual Fuel Pumps and Dual MSD Boxes on the Fly
- 75-Gal Harmon Cell with Fuel Gauge
- Fresh Culhane TH400 with Close Ratio Gears and a Fresh Converter.
- Tig Welded H&M Race Kit
- Upgraded Spindles by Roy Tomkins
- All New Heims and Uniballs
- 2.5 King Coilovers with 4.0 King Bypasses (all rebuilt)
- New Wheel Bearings and Rotors
- TT Pattern Hubs
- Rear tube works 4" tig welded housing
- TT 36 Spline Axles
- 10" 3rd Member
- All New Bearings and Rotors
- Had the axles checked for cracks and the third member by Roy Tomkins
- Dirt-Tech Tig Welded Trailing Arms
- 3.0 King Coilovers and 4.5 7 Tube Bypasses (all fresh)
- New Sparco Seats
- New Seatbelts
- Lots of Baja Designs Lights
- New Fiberglass Front and Rear
- New Wrap
- Steel Working Doors with Windows
- 40" Tires
Some Videos from the Previous Owner
The truck is fully prepped and ready to go.
Truck has a title and registration.
Much more info available just call or text
95k or possible trades
Thanks for looking. Jeff.
Located in Santa Maria CA.
ID# 173439Posted Jul 14
2015 Dunn Tech Class 12 single seater
Single seat class 12 car race ready after full prep. New low compression engine with 10 miles on it.
Mendi 2d Deco case with 100 miles on it, Fox 2.5 front, rear 2.5 by pass with 2.0 cool over. Cbm oil cooler, Cnc hung pedals with turning break, Pro am rear hubs with King Kong stubs, Jamar X front hubs, Howe Diablo rack with 2.5 ram steering ,Fodral 4 over arms and drop King Kong spindles, Momo super cup hard seat, Prp seat belt with ratchet lap belt ,Kenwood 50 PCI radio, Lowrance Elite 9 inch touch screen GPS one race on it, Jamar shifter, car is fast and built right no cracking issues. Text or call me for any questions or photos not listed
possible trades with cash
ID# 178005Posted Jul 14
0 VDE Pro Buggy
Selling my Championship Off Road Pro Buggy
-Mendeola MD5 w/ New Deco Case and Weddle Helical LSD
-Chromoly rear axles with race prepped 930-cvs and chromoly cages
-MicroStub rear hubs
-A-Arm suspension front and rear
-Fox shocks all the way around
-Front 2.0 reservoir coilovers
-Rear 2.5 Triple bypass w/ 2.0 Coil Carriers
-C&R Dual Pass Race Radiator
-Le5 2.4 Ecotec Engine
-Redline Performance Harness and ECU w/ RacePak dash and Data Logging sensor functions (cable and sd card included)
-Wilwood Master Cylinders
-CNC Clutch Slave Cylinder
-CBM Engine Adapter, Flywheel, Kennedy Stage 3 Pressure Plate, 4 Puck clutch
-Billet Redline Performance Water Neck/Thermostat Delete
-Billet Oil filter Adapter for Remote oil filter and cooler
-CNC Turning Brake
-3an Braided Stainless Brake lines
-Wilwood 2 Piston front Calipers
-4 Piston Calipers Rear w/ Inboard Brakes
-Electric Power Steering
-Spare body, arms, hubs
Available After Fall Crandon
ID# 160562Posted Jul 13
2017 Jefferies / BMS Trophy Truck
2017 Jefferies / BMS Trophy Truck in immaculate condition. Only raced a few times, great fast truck. Selling due to neck surgery and can no longer race. Just had fresh prep, race ready.
-489ci RHS block engine
-Reid case turbo 400 race trans
-Fortin underdrive and rear gear
-Billet torque convertor
-85 gallon fuel cell
-Large CBR radiator and coolers
-All motec electronics with redundant sensors
-Dual DC power alternators
-Jamar hubs and brakes
-King 4.5 bypass and 3.0 coil over on all corners
-Bunderson jack and pro eagle jack mounted on truck
-New raptor body and new spare raptor body included
-Spare parts / wheels and tires included
Open to trades for property in southern Idaho, Jerome or twin falls area or cool stuff
Jonny 760-694-4252 call or text for more information
ID# 177971Posted Jul 12
2017 Matt Walrath
For sale: Custom Matt Walrath Truggy/ Trophy Truck/Pre-Runner with over 330K invested. This truck is truly one of a kind. Completed in 2017 this Truggy comes equipped with a VIN TAG and Green sticker which is very hard to do with these custom trucks. The custom made/fabricated parts on this truck are like a piece of art. You really have to see this truck in person to appreciate it, pictures really don’t do it justice. Once completed in 2017 Ive spent the last couple years dialing in the truck and hauling ass. All the pictures are recent, just spent 40+ hours re-painting the Chasis, car looks brand new. Prob has about 1k miles on it. Take it from me or anyone else that’s done a build like this, your much better off buying a used car than building yourself. It cost me 4 times as much $ as I thought I would spend and that was just to build it. This thing is dialed in, reliable and ready to go. This car is very fast too, at around 5,000lbs, 700 hp and the suspension setup it has it eats up the massive whoops in Barstow and can hit a top mph of 117. If your looking for something different, eye catching and unique this might be the car for you. Race it, pre-run it, take it to the dunes....leave it as a truggy, throw a trophy truck body on it. Its very versitale and extremely fun to drive. I’m looking for 139k OBO. Like I said I have over 330k into it.
-Truck is lighter than most trophy trucks and weighs about 4,900lbs with fuel.
-Chevy 454 LSX engine (around 700hp) with Melling oil pump, fast intake and custom headers/exhaust. Dyno tuned by Westech.
-Holley HP EFI Engine Harness/ECU/digital display.
-250 amp alternator.
-Reid Case Culhane built Turbo 400.
-King Shocks Front: 2.5” coilovers and 3.0” x 14” 5 bypass’s.
-King Shocks Rear: 3.0” Coilovers and 3.5” x 18” 5 bypass’s.
-Custom Rear End Housing by Matt Walrath: 10” Gear Works third member with a 5.33 Gear Ratio. Perfect for this car, absolutely rips when you punch it, still can hit 117 top mph.
-40 spline 300m 1 3/4” axles.
-80” worth of Baja Designs Lights. 50” bar on top, 10” amber bar in the bumper and two XL80 pods as well.
-Billet Power Steering Solutions Trophy Truck Power Steering Pump
-Fortin Racing PR2 2.5 Steering Rack.
-68 galan fuel cell Harmon Racing bladder.
-custom headers and exhaust.
-PCI Radio, Intercom and fresh air system.
-ProAm Hubs and CNC Brakes.
-37” BFG KR2’s mounted on Robby Gordon 17” wheels 5 on 5.5” bolt pattern.
-Nitrogen tank mounted underneath car with Bunderson air Jack.
-37” BFG Skat Trak Paddle tires for the dunes.
-MasterCraft seats (3rd seat can be mounted in back if wanted.
Spares that come with car
-one spare wheel/tire mounted on car
-one spare tire with no wheel
-two 37” paddle tires for the dunes
-klixon breaker switches
-spare air filters
-spare oil and fuel filters
-spare driveshaft mounted on car
-spare axles and 4 link arm
-spare slip yoke for 3rd member side and transmission side
-spare 180 amp alternator (250 amp on car)
-3rd seat for back of the car
ID# 175118Posted Jul 11
0 Chevy Geiser Brothers
Legendary Class 8 #1 Geiser Has raced, NORRA,BITD, SCORE, CODE, SNORE, You could race Class 8, Sportsman or Convert to 6100, or run Trophy Truck with some of the groups. Add a cab and working doors and convert to a 1450. Full frame 100% class 8 legal. This truck can compete with 85 percent of the Trophy Trucks running today. BUILT TO BE RELIABLE.
Tuned on 100 Octane Race Gas, 11-1 compression, Built with quality parts by HBR Performance Las Vegas NV .
Evans Motorsports complete restoration of the #1 Built Geiser Brothers CWI Class 8. Truck was campaigned by Geiser Brothers and CWI in Score for its first 2 years of running in the early 90s.
Due to recent neck surgery, I will not be racing the truck.
#1 Geiser Brothers CWI Class 8 original built started in 2000 finished in 2001
New HBR 350 Dart Block 434ci 600 HP prox.
New GearWorks T400 Trophy Truck Transmission.
Re-Built Widened Christman Housing with new axels and Gearworks Center Section.
New Willwood Calipers, Rotors
New One Ind., Sandy Cone 6 on 6 hubs, Spindles, uprights.
New Trailing Arms
8 New BFG Tires 40s with New Trailready Beadlocks.
New VisionXUSA Light Bar and Front bumper lighting.
New TT Power Steering Pumps one spare
New 270amp Alt with Spare
New Mastercraft 3G Seats New belts
Re-Built King bypass and coil overs. 4.0 and 3.0
Re-Wire Complete Rewire of entire Truck
New Lowrance 12 Inch GPS
Inspected Kenwood 110 Watt Main Radio with 50 Watt back up.
New Safecraft fire system with 3-10 pound bottles. Engine, Cab and Fueling cell, 3 pulls handles.
New Stainless Steel Headers and exhaust system.
New CBR Radiator. CBR oil coolers.
Possable Trade's? Lets see what you have, Will consider Trades plus cash.