ID# 178313Posted Jul 23
0 King Race Series
Race Series, Brand New, Never Been on a Vehicle. 4 Tube Bypass.
ID# 178315Posted Jul 23
0 Ford F150
Forsale is a pair of remanufactured Ford 5.4L / 4.6L 3V cylinder heads. They are complete with lifters, rockers and new camshafts. I payed $1200 for them and they required me to send my old heads back also. So here is your chance to get a deal and not have to send in your old heads as cores. I just went a different route with my engine build. So I don’t need these anymore. Just double check that your heads match 3L3E as seen in my pictures. That number will be on the exhaust manifold side of the heads. Asking $850 call or text Marc at 805-660-8159
ID# 178279Posted Jul 22
The Kenwood TK-790H radio is for the best of the best. The 110 watts of power gets incredible range in off road racing conditions. They do not have the yellow ignition wire like some other ones (who wants extra wires). We can do the Race modification for $85.00. These are NOT the old 730h Will ship for FREE. We except PayPal or COD with UPS
• 110 Watts of power
• 160 Channels
• Alpha Numeric Display
• 790h not 730h
• Built in speaker in head
• Remote head ideal for cars or trucks with limited dash space. Mount the body of the radio behind the seat and the remote head is at your fingertips.
ID# 178179Posted Jul 20
This transmission was in my Alumicraft dual sport. It went up to Rancho Transaxle and has been completely gone through with new gears, bearings, ring and pinion, side plates, throw out bearing etc.. Zero miles on the tranny since rebuild was done within the last couple months. The gear ratio's are as follows:
1st - 1237
2nd - 1432
3rd - 1628
4th - 1825
5th - 2025
Ring & Pinion - 7.34
If you have any questions please give me a call or text. Bear @ 760-522-2338
Price $11,500 obo
ID# 178177Posted Jul 20
Wicked Creations rearend housing, These rearend housings are built to the highest standards, the base rearend has 3/8 Face Plate, 3/16 shell, and 3.5 x .250 4130 axle tubing. Housings have inner gussets and have been thoroughly race tested in the USA and abroad. These housings have been ran in Score, Dakar, Baja, and more. They will accept a Ford 9" or 10" 3rd member. These housings are special by they are made housing centered and equal length axles. These include a WC Large Fill cap and a 3/8 NPT drain.
ID# 178175Posted Jul 19
0 VW Bug / Buggy / Baja Bug
For the hardcore VW pan based bug or buggy builder. Wicked Creations offers its same great coilover conversion kit but with a double shear, and a lock for the pivot bolt. This takes alot of the load off the bolt, and locks it in so it cant come loose. For use when using bigger tires, bigger engine, or more suspension travel. This kit comes with everything you need. The kit includes (2) double shear mounts that bolts to your VW torsion housing, (2) 3/4 heim joints, (2) 3/4 jam nut, (2) trailing arm mounting plates, (2) 3/4 bolt locks with (4) 10-32 locking screws, (2) 3/4 grade 8 pivot bolts, and torsion mounting hardware. MADE IN THE USA out of lasercut 1/4 mild steel.
WIY (weld it yourself) Kit - $200 this kit includes everything but Heim Joints and Jam nuts
Welded Kit - $300 - includes everything in part description above
ID# 178150Posted Jul 19
Our number one seller, for a reason. We designed a skid and mount for the most popular jack in the desert.
The skid, is lightweight aluminum, laser cut and mounts directly to the Harbor Freight aluminum racing jacks. It allows the jack to slide over dirt, gravel, rocks and is lightweight and easy to manage.
The mount, is laser cut out of steel so it's easily bolted or welded to whatever application you need. We used a spring loaded pull pin that locks into the jack skid and is 100% secure.
Save money and buy the combo kit that includes the Wicked Creations jack skid plate, and the Wicked Creations jack mount. Perfect for you chase truck, trailer, garage, or rig. If you only need one or the other, they are available individually as well.
Available for the Harbor Freight 1.5 Ton, 2.0 Ton, 2.5 Ton, and 3.0 Ton Jacks.
Designed and manufactured in Garden Grove, CA.
*JACK NOT INCLUDED
ID# 178149Posted Jul 19
0 Toyota 4 runner / FJ Cruiser / Tacoma / Lexus
The Wicked Creations long travel kit was developed to drastically improve the vehicles off-road handling without compromising its day to day driving characteristics. This suspension system allows for 13.5” of travel and accepts up to a 35” tire. The kit is compatible with 2WD models and 4WD models along with the purchase of extended axle shafts. Our upper and lower arms are designed with 1” stainless steel uniballs for the outer pivots instead of ball joints for strength and increased articulation. Compared to the competition we’ve gained several inches of ground clearance by mounting the lower arms in the factory location instead of below it. This kit is CAD designed, thoroughly tested, and 100% made in America resulting in a product we’re proud to put our name on!
ID# 178056Posted Jul 15
• 1 Set W / Mounts = LaserStar Single Row 14’’ Light Bars $150
• 3 Sets Baja Designs SOLTEK W / Mounts & Connectors (4 Spots & 2 Floods) $500 for all or $175 Per Set.
• All lights work perfectly, I’m willing to ship @ buyer’s expense. Located in Redlands / So. Cal.
ID# 177876Posted Jul 09
Danzio SBF 454 ci
Dart aluminum 9.500 block
Ultra pro Billet 9 degree heads
Dyers 300m rods
Sonny Bryant 4.250 crank
RCD gear drive
Kinsler 8 stack
Meziere water pump
Dc power billet 240 amp alternator
Dailey billet oil pan with integral Dry Sump 6 stage Oil pump
Danzio air filter assembly will come with the engine
This engine is brand new only has Dyno time, never been installed
848hp @7300 685tq @5400