ID# 182362Posted Dec 01
Engine and transmission not included
New front and rear lothringer arms
New front spindles
New Jamar front and rear hubs
New 934 CV’s and axles
Pyrotect 35 gal fuel cell
Safecraft 5 point seat belts
Fox shocks 2.5 front 3.5 rear
Intercom and kenwood radio
Weddle Sequential gear shifter
Spare fuel pump
BFG 35” all-terrain
Includes all this except engine and trans
Car has a fresh prep and race ready
ID# 180851Posted Dec 01
0 Fulltilt TrophyKart Modified Kart
-2 computer system
-2 battery system
-Aim sportsdata Mychron 5 2T
-Front and Rear Wildwood brakes
-Carbon fiber Panels
This Kart has made it on top of the podium and has only raced for two seasons, it comes with spare parts and comes with a motor tuned for chassis and ecu
ID# 182422Posted Nov 30
2021 Bomber 4400
2021 Bomber Fab Chassis un-welded and parts to make roller.
I bought this thinking I was going to build it but bought a partially finished one instead. I need to sell this one or so my wife says.
Front Shock Mounts
Rear upper shock mounts
T case mount ( ATLAS)
Link mounts on chassis=8
Front axle truss with upper link mounts and ram mount 4130
axle link mount = 4
Bomber fab motor mounts 4130
Rear truss & link mounts
Rear trailing arm kit
Front lower link kit 4130
Spidertrax- 31/2" pro series housing=2
Spidertrax- 3-1/2" mild steel housing ends
Spidertrax rotors = 4
Spidertrax hats = 4
Spidertrax ultimate unit bearing, 6 on 5.5" X 5/8" Studs = 4
Spidertrax knuckles with steering arms
Spidertrax front brake caliper brackets
Spidertrax rear brake caliper brackets
Inner axel seals = 2
Wilwood brake calipers and pads = 4 (used)
Fox shock bypasses = 4, coil overs with coils = 4 (used)
Fuel cell new 28-30 gallons?
Steering wheel shaft with bearings
Winters shifter for turbo 400 reversed pattern
Bomber headers and exhaust for LS engine
Front king bump stops with cans (used)
PRP suspension seats with front pockets (new)
Raceline avenger wheels = 5 powder coded (new I think)
I also have brake pedals and master cylinders and probably some other odds and ends I am forgetting. Everything is new unless stated otherwise after item. This would make a great project for someone looking to save time. Also, I have steel block LS engine with aluminum (LS3) heads used and a 3.0 ATLAS transfer case for an additional cost.
ID# 182348Posted Nov 29
Built from a 07 chevy dually duramax . All fabrication done by professionals and built overkill for shure. Deck on front is 7’11’’ wide by 5’6’’ long not including the tounge. I built it big enough for 40’’ tire across the deck , cabinets above the tires and a fuel tower on top to be the same height as top of the trailer. Enough room in front of the tires for a 100 gal fuel tank and the two extra trailer spare tires on the tounge . I will include pictures of how i mocked it up. All doors and compartments lock with keys. Trailer light wiring complete and ready to use . Still has duramax disc brake Rearend under it so if a person wanted they could simply add a spurge brake hitch or like i was going to do use a electric over hydraulic pump.either way Prety easy . Has no registration as i sold the pink to the truck with the cab . So either needs dmv to make it a custom pti trailer wich I believe is 30$ for 5 years or need paper work and plate from another trailer. Would make a great motorcycle trailer with sleeping area in back, or great work trailer wit enough space on deck to haul misc stuff . Tons on uses.price is more than reasonable when you figure how much a good enclosed service bed including the truck frame and the about 4K in materials and fabrication to build it . Any questions call dan @ 831 234 9111 with deposit i am willing to deliver to so cal . 6,000.00 obo
ID# 182315Posted Nov 28
This is a Gen 1 ES Motorsports Class 10 Car
Car is mid-engined.
Very new Wiks Ecotec (only 150 miles on it)
Fortin 6 Speed Trans just gone through by Folts
New Life ECU System
New Lowrance GPS
New PDM Units
There is a Impact seat in drivers seat now. Will come with Beard seat.
New Vision X Lights up front
Rigid Light Bar
Comes with 10 New Raceline wheels on New BFG Tires (4 on, 6 spare)
Also comes with a bunch of spare parts. Text for a list
Car is in great shape, was gone through recently.
Left all the safety stuff in it (triangle, tow strap, etc.)
Car is ready to race as is. Just completed BAP
Text me if you want any information. $80k obo
ID# 182277Posted Nov 27
0 Bomber IFS Ultra 4 IFS Armada Front End
One of a Kind, IFS Bomber. Rear Engine, Front fuel cell. Armada IFS Front End. Tube Works Rear. King coils overs, Bump Stops and By Pass, ARB Lockers, Reed Case turbo 400, Warn Winch, Vision X Radius Upper Light bar, Street Legal Kit with blinkers and DOT Hellas. Chromoly Skid Plate covered by UHMW, Sparco racing seats, CBR Radiators, and Trans coolers, Pro Am 6 piston calipers, Hawk DTC 60 Pads, RCV Axles, Spidertrax billet stubs inner and outer unit bearings, floater cups, axle seal kit, 4: chromo housing, Safe Craft automatic fire supression.
Front and Rear gear works diffs, Pro Am CV’s, CV boots, rotors and calipers, Howe Power Steering and Rack. James Lin wired and tuned Motec M130 ECU and Motec c127 7 inch dash, Kenwood 100 Watt Radio, Rugged Race intercom, 7 inch Lowrance, 780 HP 454 RHS Chevy LS with RCD Diamond Drive, built by Mike Porter at Redline. RPM Custom Headers and exhaust, Bently Gamer custom Aluminum. Gerald King (AKA) Smitty custom fab and Desing, plumbing and Chassis Harness. 5 KMC Bead Lock on Toyo 39 Race Tires. Never Raced. Car is brand new, used only a few times. Ready for KOH. Serious inquires only. 280k
ID# 182262Posted Nov 26
1995 Funco 1600 SS
Perfect off-road car for someone with disability. Single-seat Class 16 off-road car with Fox suspension with remote reservoirs (fully rebuildable) and an $8,000 1600cc Blueprint VW engine built to race the Baja 1000.
We converted the car to be driven via hand controls. By installing steering quickeners, we were able to put handlebars in it like a motorcycle. It has a thumb throttle, hand brake, and hand clutch, and horn button on the bars. The bars have a quick release for fast and safe emergency exit. Where the pedal box was is now a plate with a loop to hold the driver's feet in place, also with a quick release for fast egress.
We also changed the bracing on the cage (professionally TIG welded and just as strong as it was before) to make a door on the left side. There are quick release pins to remove the nerf bar, pull the side body panel off, and then swing the cage bar out of the way to easily get into and out of the car from a wheelchair or if one has mobility issues, such as myself.
Safety equipment includes a 4-point harness, racing seat, multiple fire extinguishers, horn, battery cutoff switch accessible from the driving position, and oil pressure warning light.
I'm only selling it because I now live in the Seattle area while the car is at my dad's shop in Idaho and I never get a chance to drive it anymore. I absolutely love the car and we put a ton of work and money into it.
It comes with an entire extra block, though this motor and 4-speed manual transmission was built for the high temps and torture of running 24 straight hours through the torture of Baja.
If the car doesn't sell within a few weeks, we will convert it back to the regular steering wheel and foot controls. This can be done now as well.
Price is OBO, and can be delivered within a reasonable distance.
ID# 180514Posted Nov 26
0 Tatum two seater
Tatum C1, updated Tatum front end
SCORE Tagged, car has AZ title.
new 427 CBM engine, not even dynoed
Mendeola HD4S sequential trans, fresh prep 0 miles
King 3.0 fronts & King Kongs 4.0
shocks serviced and valved by RomoRacePrep
Big Tatum hubs and calipers on all corners
Big series 30cv's, Howe PS Rack, big PS cooler
37x13R17 New Toyo Tires, also a few spares
BTR Beadlocks, new Fuel Cell bladder
GPS, Kenwood PCI Radio, intercom, pumper, the usual equipment
Mastercraft 3G, seats, belts and safety nets
Fire Suppression system etc.
more pics at facebook page
small walk around video link
ID# 182258Posted Nov 25
2006 Jeep LJ
2006 Jeep LJ
Ultra4 banded 4600 car
This is a competitive 4600 car that is ready for KOH. It would also make a good trail car. The car won the 2021 Ultra 4 race in TN. The cage was built to still accommodate the rear seat. The full cell slides back to the tailgate and the factory seat bolts into the factory mounts. In less than an hour the rack that holds all the spare fluids and drive shafts comes out, the fuel cell slides back, and you have a good 4 seat trail car. I have a bunch of spares that can go with the car as well. Show up with a fire suit and helmet and be ready to race. The car is in Dallas TX, but I could get it to KOH for the right price.
1990 King pin Ford Dana 60
Trussed with a backbone
Yukon chromo axles
Yukon Super Joints
Yukon drive slugs
Yukon competition Zip locker
Yukon 5.38 gears
Chevy ¾ ton brakes
14 bolt trussed
ECGS shave kit with shaved ring gear. (same clearance as a Dana 44)
5.38 Yukon gears
Yukon chromo axles
Front 12” x 2.5” King Shocks (7” up travel)
Front 2” x 2” King Bumps
Rear 14” x 2.5” King Shocks (9” up travel)
Rear 2” x 2” King Bumps
TK1 Ultra4 spec sway bars front and rear.
Wide Open Designs 7075 lower links front and rear.
DOM upper links
1.25” heims on both upper and lower links.
3 link front
4 ling rear
Warn 8274 winch
Upgraded 9.5K XP winch motor.
This winch is very fast and powerful.
All steering linkage is 4030 chromoly that has been heat treated.
PSC quick ratio steering box
2 turns lock to lock.
PSC 1.5” x 10” hydro assist.
PSC steering pump
2” x .120” wall main cage with .095” and 1.75” in some of the supporting bars.
Corbeau FX1 Pro seats.
Custom Window nets fron 5Zero3
1in cab and 2 roll cage fire extinguishers on quick releases.
32 Gallon Fuel cell
2 in tank Walbro pumps
4 Walbor pickups (one in each corner)
Plastic baffles (no foam to deal with)
42RLE built by ATS Diesel. They are a sponsor so they did everything they could, and it’s been great since they reworked it.
12” x 12” plate cooler with fan.
Flipped Dana 300. I used the North West Fab flip kit and cable shifters.
Front and rear drives shafts by Woody’s.
Wheels and tires:
17” raceline wheels
35x12.5R17 MRT tires
8 total mounted wheels and tires.
1 extra brand new tire with no wheel.
Stock except the intake tube has been rerouted to the cab for cool dust free air, and the ECU has been tuned for 93 octane.
Durango high output alternator.
Brown Dog motor mounts.
Rugged Radios intercom
IPad mount is built into the passenger handle. We ran Leadnav.
ID# 130451Posted Nov 24
0 Armada/Aerolite 6100
Used 6100 / TT Spec for sale. Very low miles. Only raced twice. GM LS3 with Gearworks TH400 Trophy Truck Transmission, 37" BFGoodrich Tires, Howe Steering, Fox Shock Package, Evan Weller Racing 3rd member, ProFormance Milspec Wiring, Dual Motec Display and PDM, 90 gallon fuel cell. Contact for more details. Will consider trades.